EVK2005 Demountable container

Container structures whose wall blocks are completely produced using sandwich panels are called sandwich panel containers. It has the advantage of providing energy savings with its high quality, long-lasting use, maintenance-free, high insulation performance. Panels are produced by placing EPS filler as standard between specially painted high galvanized non-corrosive sheets. According to the customer’s preference, rock wool filling can also be used as an intermediate insulation material.

Evkon new generation sandwich panel container is produced in 40 mm thickness on the wall and has superior features. The wall insulation is supported by the use of a single glazed, special quality PVC window and a special door with sheet metal panel system that provides full closing. By connecting the roof trapezoidal sheets with the clamp system, the container is fully impermeable. Evkon sandwich panel container models save budgets with energy savings of up to 60 percent compared to their counterparts.

General Specifications
SYSTEM
main carcass ; 1.5 mm for corner, ceiling and floor to enable the container to be lifted in one piece, stacked in two or three floors. It consists of material obtained by special bending (sigma) from galvanized sheet. Container outer height 2500 mm., inner height 2300 mm. is
STANDARD DIMENSIONS
Standard sizes; 2400x6000x2500mm. (average weight 2000 kg.) and 3000x7000x2500 mm. (average weight is 2500 kg). Special manufacturing dimensions are as indicated in the plan.
TECHNICAL
Container productions, snow load 80 kg/m2., wind speed 90 km/h., chassis load capacity 200 kg/m2. (TS 498) is made taking into account. Standard wall thermal insulation values; The outer wall is 0.74 kcal/m2 hc., the inner wall is 0.69 kcal/m2 hc., the roof transmission coefficient is 0.68 kcal/m2 hc.
BASE
16 mm. on the steel carcass made of specially manufactured 1.5 mm galvanized sheet. thickness, ~1300 kg/m³ density, B1 DIN 4102 Part 1 (non-flammable), thermal conductivity coefficient (λ10˚C dry): 0.15 W/mK, betopan (cemented particle board) . The PVC flooring of this system is covered. Customer cannot choose color and model for PVC flooring.
Roof, Ceiling, Exterior Wall and Interior Wall Features
SHEETS
lifting apparatus consists of 5 mm special laser cut galvanized sheet and carrier pillars consist of 1.5 mm galvanized special twisted sheet
DRAIN AND DOWN
There were hidden creeks provided by the roof construction and hidden landings formed by the corner posts.
ROOF COVER
4 cm eps roof panel
CARCASE
Carcass made of 1.5mm sigma
CARCASE
Carcass made of 1.5mm sigma
COVERING
4 cm eps roof panel
INSULATION
14-16 kg/m³. Density B-1 class polystyrene foam
OUTER WALLS
0,35 mm thick, 200 gr/m2 galvanized HDG painted with COIL COATING method, outer surface 5 micron primer and 20 micron RAL 9002 polyester painted, inner surface 5 micron primer painted galvanized sheet
INSULATION
14-16 kg/m³. Density B-1 class polystyrene foam (4 cm Panel)
INTERIOR WALLS
0,35 mm thick, 200 gr/m2 galvanized HDG painted with COIL COATING method, outer surface 5 micron primer and 20 micron RAL 9002 polyester painted, inner surface 5 micron primer painted galvanized sheet
INTERIOR WALLS-1
0,35 mm thick, 200 gr/m2 galvanized HDG painted with COIL COATING method, outer surface 5 micron primer and 20 micron RAL 9002 polyester painted, inner surface 5 micron primer painted galvanized sheet
INSULATION
14-16 kg/m³. Density B-1 class polystyrene foam (4 cm panel)
INNER FACES-2
0,35 mm thick, 200 gr/m2 galvanized HDG painted with COIL COATING method, outer surface 5 micron primer and 20 micron RAL 9002 polyester painted, inner surface 5 micron primer painted galvanized sheet
Door, PVC Joinery, Paint, Electrical And Plumbing
INTERIOR DOORS
90x2000mm. American panel
EXTERIOR DOORS
90x2000mm. 4 cm eps panel sheet metal door
WINDOWS
100x120 size, single wing, PVC joinery is given according to the project
WINDOWS
Window Glasses: 4+12+4 double glazing
VENTILATION
60/40 wasistas window is given according to the project.
METAL SECTION
All metal parts are double-layered rapid primer.
EXTERIOR
It will not be painted as it is painted sheet metal.
INTERIOR
It will not be painted as it is painted sheet metal.
CEILING
Ceiling is white PVC paneling, no paint is required.
COLOUR
As standard, exterior body color Ral 9002 is painted, belt color Ral 9002 (if specified in writing, belt colors can be changed)
INSTALLATION
14mm. surface mounted from plastic cable ducts, 2000 Watt, 220 Volt. NYA 3x2.5 mm2 cable is used for sockets and NYA 2x1.5 mm2 cable is used for lighting. Fuses are 25 Amp in sockets, 16 Amp in lighting. The materials are sent. Assembly is done on site.
ARMATURE
One switch, one electrical socket and one telephone socket in each room, oval ceiling 1x35 torus armature 60 W in all spaces, wall globe 60 W on the outer main entrance door
OTHER
Electric panel, computer, data, TV installations, grounding, main line connection belongs to the customer.
INSTALLATION
The clean water installation is taken on the surface with 1/2" pvc pprc pipes, the waste water installation is drawn 10 cm outside of the building with the pvc pipes as surface mounted. The materials are sent. The assembly is done on site.
VITRIFIERS
28x45 cm. washbasin, toilet bowl and plastic cistern, 70x70 cm. shower tray is supplied according to the plan.
KITCHEN
28x45 cm. washbasin, toilet bowl and plastic cistern, 70x70 cm. shower tray is supplied according to the plan.
LUMINAIRES
The faucet is supplied according to the plan for the classic sink faucet, the bidet spout, and the instant water heater.
OTHER
Upper kitchen cabinets and external line connections belong to the customer.
Delivery
DELIVERY
Container deliveries are made in our factory.
OTHER
Transportation of the material, transportation insurance, heating-cooling equipment, office furniture, official transactions and external line peripheral connections belong to the customer. Any unit/element not defined in the technical specifications cannot be requested by the customer. It is valid if the materials written in the technical specifications are in the plan.
WARNING
Monoblock standard containers are designed for office and living use. Do not uninstall as installed. It is definitely not a freight container. Our company is not responsible for any problems that may occur due to use other than these purposes, incorrect downloads and uploads.
Plan
Plan
Left Side View
Top Left View
Right Side View
EVK2005 Disassembled Container EVK2005 Disassembled Container EVK2005 Disassembled Container EVK2005 Disassembled Container

    Ürün Özelliği Seçiniz
    Hizmet verdiğimiz bölgelerde geçerli olan
    regülasyona uygun bir çözüm üretmek bizim işimiz.
    Çatı Kaplama Tipi
    Trapez Sac
    OSB+Trapez Sac
    OSB+Mebran+Trapez Sac
    Kremetal
    OSB+Kremetal
    OSB+Mebran+Kremetal
    Shigle
    PVC Pencere Renk Seçimi
    Beyaz Renk
    Ahşap Desen
    Antrasit Renk
    İç Cephe Kapama
    Yok
    Alçıpan Kaplama
    Tavan Kaplama
    Standart Tavan
    Ters Tavan
    Dış Cephe Kaplama
    Kaplama Yok
    Taşonit
    Ahşap Desen
    Yalı Baskı
    Prefabrik Yapının Tavan Yüksekliği
    250cm
    280cm
    300cm
    İç Duvar Kalınlıkları
    100mm
    60mm
    Dış Duvar Kalınlıkları
    100mm
    60mm
    PVC Pencereler Opsiyonel Özellikler
    Karolajlı
    Menteşelik Sineklik
    Store Sineklik
    Teklif Al
    Hizmet verdiğimiz bölgelerde geçerli olan regülasyona uygun bir çözüm üretmek bizim işimiz.
    KVKK şartlarını okudum ve kabul ediyorum.
    0 262 751 51 47 Get Offer